INDUSTRIES · PLASTICS & RUBBER

Every cycle counted, every mold earning its keep.

Injection and molding is a machine-time business: the asset runs 24/7 and every idle cycle is lost margin. We instrument machines and molds, count cycles and scrap honestly, and turn energy — the hidden bill — into a number per part.

Trusted by 100+ businesses …10 years delivering for Japanese companies, across 9+ countries
01
Where this industry bleeds

Plastics & Rubber — four ways margin leaks out

Nobody knows which mold is the bottleneck

Molds rotate between machines and maintenance is done by feel. Cycle times creep up, and nobody notices until quality complaints arrive.

Scrap reasons are a mystery

Short shots, flash, warpage — the regrind bin fills up but the reasons are anecdotes, not data.

Energy per part is unknown

The electricity bill arrives as one number for the whole hall. Which machine, which mold, which product burns it — nobody can say.

Machine utilization is guessed

Utilization is quoted in sales decks but the shop floor has no counters — or counters nobody reads.

02
Standards we build for

We align records with the disciplines that matter in polymer processing:

ISO 9001

Quality management

Process parameters and inspection records kept consistently per machine and mold.

ISO 50001 (alignment)

Energy management

Sub-metering and reporting built for an energy-management path, if you pursue it.

GMP (food-contact)

Hygiene for food-contact packaging

Cleanliness and traceability records for packaging lines serving food customers.

Customer PPAs

Customer part approvals

Parameter evidence per mold and machine pairing, ready for submissions.

03
Typical stack

How the six systems show up here

IIOT

Cycle counting, temperature/pressure signals, mold ID via RFID, energy sub-metering per machine.

MES

Mold-level scheduling and maintenance tracking, scrap reasons at the machine, per-shift reports.

AI

Scrap prediction on process drift — intervention before the bin fills up.

DATA

kWh per part by machine, mold and product — the number that changes investments.

→ See the six systems behind these results →
04
Quick wins, 30–60 days
1

Cycle-time dashboard per machine

Drag visible in hours, not months — and the slow machine gets attention the same day.

2

Scrap pareto by machine and shift

One week of honest reasons beats a year of anecdotes; the top-2 causes get fixed first.

3

Energy per part baseline

Sub-meters on the top-5 machines — a baseline every improvement can be measured against.

05
A typical engagement

Four moves, zero disruption

  1. 1

    Free diagnosis: machine inventory, mold list, energy walkthrough

  2. 2

    Pilot: cycle + energy monitoring on top-5 machines

  3. 3

    Scrap reasons at the machine, mold-level scheduling

  4. 4

    Scale per hall; AI where the scrap data proves the case

What it moves
OEE by machine Scrap % with reasons kWh per part Mold maintenance on time
ALL INDUSTRIES

Industry FAQs

How does an MES improve injection molding monitoring?

It captures cycle times, downtime and scrap reasons directly from each press, per mold and per shift. You see which mold is the bottleneck and why parts are rejected, instead of relying on end-of-shift estimates.

Can you measure energy per part and scrap by cavity?

Yes. IIoT meters and press signals are tied to the running mold and job, so energy per part and scrap by cavity become numbers you can act on.

Do you work with plastics and rubber plants outside Vietnam?

Yes — Vietnam and Japan are home bases, and we deliver in Thailand through regional partners. Diagnoses can run online, pilots need a plant visit.

How do we start with an MES in a molding plant?

Start with a free diagnostic mapped to your cycle-time, scrap and energy pain points, then pilot machine monitoring on a few presses. Once proven, roll out plant-wide and site by site, with reporting in Japanese, Vietnamese or English.

Start here

Book a free plant assessment.

60 minutes, at your factory or online. You receive our notes and a prioritized improvement map — free, with no obligation.

What you get

  • A senior engineer and a bilingual consultant lead the session.
  • Reply within one business day, in Japanese, Vietnamese or English.
  • Fixed-scope pilot proposal within two weeks of the visit.
60-min Diagnosis
1-day To reply
2-weeks To proposal

Tell us about your plant

    No newsletter. No jargon. Your details go only to our factory team.